Filtering Respirator FFP3 Face Mask , Air Pollution Protection Mask White Color
Descriptions
1. Disposable N95 masks, Breathable,anti dust,sanitary and convenient for using.
2. The inner layer of activated carbon can filter harmful gases or odors.95% filtration, a 360-degree three dimensional breathing space,provide anti-bacterial and anti-dust protection for you.
3. Made of high quality material, safe, soft and comfortable,reduce skin irritation.
4. High elastic rubber band, absorb sweat and not tight
5. With a concealed plastic nose, anti fog, built in cartilage bridge, can be adjusted to avoid voids and reduce the inhalation of harmful substances.
6. Folding thin section, lightweight and easy to use
Mask CE Quality Standards
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
Feature:
1. Multi layers of protection
Filter large particles of non-woven fabric, melt-blown fabric, non-woven
2. Melt-blown fabric
Electrostatic adsorptron, filter PM 2.5 haze and dust
3. Non-woven fabric
With anti-splash function, effectively prvent in halaton of droplets and water vapor
4. Heat preservation
It is warm, soft and breatherable.
5. 3D model
Three-Dimentional imitate shape of nose and mouth, perfectly wrapping people mouth and nose
Packing:
5pcs/box,12pcs/ctn.Each mask under individual polybag.
The disposable respirators available in color box package and blister packaging.
Certification
This product has been tested according to the following European Standard:
EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.
It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.
How to use?
- Hold the filtering facepiece in the palm of your hand allowing the headbands to hang freely on the back of the hand.
- Position the filtering facepiece on the face covering the nose and the mouth and making certain that the metal strip nosepiece is on the upper part.
- Pass the lower headband over your head and position it on the neck. Pass the upper headband over your head and position it on your head and above your ears.
- Adjust the nosepiece to fit your nose. Regulate the tension of the headbands(in those models where this is possible).
- Check that the mask hugs your face closely.
6. Warning
- The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
- Use in adequately ventilated areas,which are not deficiency of oxygen.
- Do not use this respirator when oxygen concentration is less than 19.5%.
- Do not use the mask in explosive environment.
- The mask must be fitted correctly to ensure the level of protection expected is achieved.
- The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
- For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.
7. Discard and replace the mask if:
- The mask is removed whilst in the contaminated area.
- Clogging of the respirator causes breathing difficulties.
- The mask becomes damaged.
- For respirators protecting against vapours,the smell of vapours present becomes derectable.
8 . More pictures
Product Tags:
|
|
Filtering Respirator FFP3 Face Mask , Air Pollution Protection Mask White Color Images
|
